SOLID Ku-CB1 C-Band LNBF with Feedhorn for offset Ku-Band Dish Antenna

SOLID C-Band LNBF with Feedhorn for offset Ku-Band Dish Antenna

If you want to installed C-Band LNB on Ku-Band Dish antenna then this LNBF is best for you, This LNB comes with offset feedhorn and Clamp so that you can install easily.

C-Band LNBF with Feedhorn for an offset Ku-Band Dish Antenna is a specialized device designed to receive C-Band satellite signals using a dish typically meant for Ku-Band signals. Here’s a breakdown:

• C-Band LNBF: Low Noise Block Feedhorn that converts C-Band signals (3.7-4.2 GHz) to a lower frequency for easier transmission to your receiver.
• Feedhorn: Directs the satellite signals into the LNBF.
• Offset Ku-Band Dish: A dish designed for Ku-Band signals (3.7-4.2 GHz) but adapted to receive C-Band signals with this setup.

Benefits:

1.Versatility: Allows the use of an existing Ku-Band dish to receive C-Band signals, saving the cost of purchasing a new dish1

2.Improved Signal Quality: The feedhorn ensures that the signals are accurately directed into the LNBF, enhancing signal quality

3.Cost-Effective: Utilizing an offset Ku-Band dish for C-Band reception can be more economical than setting up a new C-Band dish system

4.Ease of Installation: Designed to fit easily onto existing Ku-Band dishes, making the installation process straightforward

5.Dual Band Capability: Some setups allow for switching between C-Band and Ku-Band, providing access to a wider range of channels

Technical Specifications:

Input - 3.7-4.2 GHz

LO Freq.: 5.150GHz

Output Freq: 950-1450MHz\

Gain: 65-70dB (Typ.)

Noise: 10K

Phase Noise : -85dBc/Hz@10KHz

Output Impedance: 75ohm F-Type

Package Included:

C-Band LNBF

Offset Clamp

Offset Feedhorn

Please note: This LNB will work great above 90cm KU-Band antennas.