Ramez
ordered
Dilos SW 4008 4in1 DiSEqC 2.0 Switch
from Jammu and Kashmir
Ramez
ordered
SOLID FS-36 Eco Series Universal Twin LNB
from Jammu and Kashmir
Anand
ordered
Remote for HDS2-5490 Set-Top Box
from Haryana
Ravindra
ordered
Remote for HDS2-8181 MPEG-4 Set-Top Box
from Maharashtra
Sujan
ordered
SOLID HDS2X-7299 HEVC 8bits H.265 Free-To-Air Set-Top Box With Free Wi-Fi Dongle
from West Bengal
RATAN
ordered
USB Wi-Fi WiFi Dongle for SOLID Set-Top Box / Laptop / Computer
from Rajasthan
Prakash
ordered
DILOS HDS2X-5463 DVB-S2X HEVC H.265 8-Bit Full HD Free-To-Air Set-Top Box with Inbuilt WiFi
from Uttarakhand
sekhar chandra
ordered
Remote for HDS2-9066WIFI , MPEG-4 Set-Top Box
from Telangana
SOLID Brings a new analog satellite dB meter which works also in low signals. So if you are having trouble by installing a satellite Dish antenna.
The SOLID SF-90 Satellite Analog dB Meter is a reliable and accurate tool for measuring satellite signal strength. Its compact design and easy-to-use interface make it ideal for field technicians and engineers. With its wide frequency range and high accuracy, this meter is perfect for installing, troubleshooting, and maintaining satellite communication systems.
Key Features
1. Frequency Range: 950-2150 MHz, covering various satellite frequency bands.
2. Max Input: -10 dBm, indicating the maximum signal strength it can measure.
3. Power Supply: 13-18V DC, allowing for battery or external power source operation.
4. Analogue Display: A simple, easy-to-read analogue display shows signal strength in dBm.
5. Compact Design: Lightweight and portable, making it convenient for field use.
Benefits
1. Accurate Measurements: Provides precise signal strength readings, helping with dish alignment and optimization.
2. Easy to Use: Simple, intuitive operation requires minimal technical expertise.
3. Cost-Effective: An affordable solution for satellite signal measurement and troubleshooting.
Applications
1. Satellite Dish Installation: Ensures proper dish alignment and signal strength.
2. Signal Troubleshooting: Helps identify signal strength issues and optimize system performance.
3. Maintenance and Repair: Useful for routine maintenance and repair of satellite communication systems.
Specification:
Input Frequency - 950 -2150 Mhz
input level max. - -10dbm
Power Supply - DC - 13-18V
How to connect:
1. connect a jumper cable from the LNB to the " Satellite" port on the digital Sat finder.
2. Connect the cable from your satellite receiver to the " Receiver" port on the digital Satfinder
