How to Scan Channels in Solid 6363 Set Top Box? (Step-by-Step Guide)
If your Solid 6363 Set Top Box is not showing channels or you want to add newly launched channels, you can easily perform an Auto Scan or Blind Scan. The Solid 6363 comes with an automatic channel search feature that helps users find all available Free-to-Air channels quickly.
Method 1: Auto Scan Channels
Step 1
Press the MENU button on your remote control.
Step 2
Go to Installation or Satellite Setup.
Step 3
Select your satellite:
DD Free Dish Users: GSAT-15 / DD Free Dish
C-Band Users: Select the respective satellite.
Step 4
Check that:
LNB Power = ON
LNB Frequency = Universal (9750/10600)
Step 5
Choose Auto Scan or Satellite Scan.
Step 6
Select:
Scan Mode: Free Channels
Search Type: Auto Search
Step 7
Press OK to start scanning.
Step 8
Wait for the scan to complete. The receiver will automatically save all available channels.
Step 9
Press EXIT and start watching your channels.
Method 2: Blind Scan (Recommended)
Blind Scan searches for all available transponders and newly added channels automatically.
Step 1
Press MENU.
Step 2
Open Installation.
Step 3
Select your satellite.
Step 4
Choose Blind Scan.
Step 5
Press OK to start scanning.
Step 6
Wait until the process reaches 100%.
Step 7
Save the channels and exit.
The Solid 6363 supports Blind Scan and automatic channel search, making it easy to find newly added Free Dish channels.
Troubleshooting: No Channels Found?
If the scan completes but no channels are found:
Check Signal Quality (should be above 50%).
Verify dish alignment.
Ensure the LNB is working properly.
Confirm the correct satellite is selected.
Restart the set-top box and scan again.
Poor dish alignment or incorrect LNB settings can prevent channels from being detected even when signal strength appears available.
Features of Solid 6363 Set Top Box
Supports Auto Channel Search
Supports Blind Scan
MPEG-4 HD Channel Support
Compatible with DD Free Dish
Supports up to thousands of channels
USB PVR Recording Feature
DVB-S2 Technology Support
These features are built into the Solid HDS2-6363 receiver.
Conclusion
Scanning channels on the Solid 6363 Set Top Box is simple and takes only a few minutes. For the best results, use the Blind Scan option to find all available and newly added channels automatically. If channels are still missing, check your dish alignment and signal quality before scanning again.